Product Detail
E-Z WELD 786 CPVC CEMENT Heavy Body, Orange
E-Z WELD 786 CPVC CEMENT Heavy Body, Orange:
E-Z Weld Heavy Body Orange is a heavy bodied, slow set CPVC Solvent Cement. This cement is part of our Industrial Grade line of products. This cement is formulated for use on CPVC pipes and fittings. It is viscous (thick) and, carries very good gap filling properties. This cement is ideal for joining large diameter CPVC pipes & fittings where the gap between pipes and fittings is large. It may also be used on small diameter pipes and fittings. This cement requires a longer cure time. When joining large diameter pipe & fittings the use of primers is highly recommended.
950 PKR
Quantity:
Standard Delivery Charges will be Apply.
Application:
Quality Assurance:
This cement is good for joining Schedule 40 & 80 PVC pipes and fittings up to 12” (30 mm) diameter interference fit. It is approved for hot (up to 180°F/82°C) and cold water pressure applications. It may also be used for non-pressure applications such as drain, waste, vent, sewer, gas, conduit, etc. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.
APPLICATION TEMPERATURE: 32° F — 110° F
STORAGE TEMPERATURE: 45° F — 110° F
The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
Physical Properties:
APPLICATION TEMPERATURE: 32° F — 110° F
STORAGE TEMPERATURE: 45° F — 110° F
The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
COLOR: SHELF LIFE: 3 years (unopened can)
Certification / Industry Listings:
This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard F493 and D2846.
Quality Assurance:
Hydrostatic Burst:
400PSI after2hour cure time at
73° F
200PSI after2hour cure time at
180° F
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. F493)
Safety Precautions:
400PSI after2hour cure time at
73° F
200PSI after2hour cure time at
180° F
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. F493)
Inhalation:
If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.
Eyes: Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
Internal: If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.
Eyes: Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
Internal: If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
© Copyright 2024 BUILD DURABLE All Rights Reserved.
