Product Detail
E-Z Weld 205 INDUSTRIAL PVC CEMENT REG.Body/Clear 480 ml
E-Z Weld 205 INDUSTRIAL PVC CEMENT REG.Body/Clear:
E-Z Weld Clear is a regular bodied, fast set, PVC Solvent Cement. This is the most commonly used product of the solvent cement family. It is formulated to provide cost-effective cement for joining PVC pipes and fittings up to 4” diameter interference fit.
3500 PKR
Quantity:
Standard Delivery Charges will be Apply.
Application:
Quality Assurance:
Safety Precautions:
Clear, Regular Body PVC / uPVC cement for use on up to 4″ (150 mm) diameter for Schedule 40. Formulated for plumbing, electrical conduit, pool & spa and PVC foam core pipe. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.
APPLICATION TEMPERATURE: 32° F — 110° F
STORAGE TEMPERATURE: 45° F — 110° F
ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
Physical Properties:
APPLICATION TEMPERATURE: 32° F — 110° F
STORAGE TEMPERATURE: 45° F — 110° F
ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
COLOR: SHELF LIFE: 3 years (unopened can)
Certification / Industry Listings:
This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems. It is also listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard D2564.
Quality Assurance:
Hydrostatic Burst: 400PSI after2hour cure time at 73° F
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564
Lap Shear:
250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564
Lap Shear:
250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)
Safety Precautions:
Inhalation: If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.
Eyes: Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
Internal: If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
Eyes: Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
Internal: If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
© Copyright 2024 BUILD DURABLE All Rights Reserved.
